The Cooling Is Not A Gimmick It Unquestionably Works .
Ive reviewed a number of GameSir controllers here on Coolsmartphone and Ive been pretty impressed with every iteration of controller sent through. So when GameSir asked me if I was interested in reviewing the latest controller the X3 USB Type with cooling I jumped at the chance.
Good Points:-
- Swappable buttons and thumb sticks.
- Good finger in the hand.
- Fits scrutinizingly any Type-C smartphone.
- Wired connection with zero latency.
- Powerful seated cooling fan.
Bad Points:-
- Only uniform with USB Type-C phones.
- Cooling fan requires a separate power supply.
- Some phones need the specimen removed.
Following on from other GameSir’s products, the X3 USB Type C controller is initially stuff released via a Indiegogo campaign. But worry not well-nigh it not reaching its goal, its once hit 558 % of its £4115 goal now at £22,978. and devices are stuff shipped out to backers. Its currently available from Amazon for £59.99
Design:-
The controller comes with a zippered delivering specimen that offers both protection and storage, it has a semi-rigid, tough nylon outer shell that’s woebegone in colour, with a red accented zipper and white GameSir logo. moreover the controller comes with spare thumbstick buttons, charging subscription paperwork and stickers, which is a nice widow touch.
The controller comes in a two-tone woebegone and white housing, the front is white, with a woebegone when and frame. In total, the controller weighs well-nigh 220 grams and plane when my S22 Ultra was in the controller it wasn’t heavy in the hand. With its overall shape ways its well-appointed to hold with contoured, rubberized grips on the backs of both sides.
The spring-loaded, frame and is designed to proffer and then clutch over your phone, the centre recess is lined with rubber, which prevents it from scratching your phone’s specimen or rabble-rousing the finish, at one end of the recess, is a male USB Type-C plug. Sitting on either side of the rubber lined centre recess are the controls themselves.
The layout is similar to what you’ll find on an Xbox or Nintendo Switch. There’s a pair of offset thumbsticks, with the one on the left higher than the one on the right. Below the left thumbstick is a directional pad. Above the right thumbstick, there’s a set of X, Y, A, and B buttons. They have an Xbox layout out of the box. There is moreover four function buttons located on the front of the controller closer to the phone, these include a home sawed-off and a menu button, there are four shoulder triggers, two on either side, all the triggers and switches are rated for three million clicks.
Setting up the controller is as easy as pop your phone into the recess, and slide it onto the USB plug, although with the 3 variegated devices I tried they all needed to be out of their cases, as the specimen stopped them seating on the USB plug correctly, a slightly longer plug would have stock-still this.
Next, pull on the sides of the controller to stretch it out to the right width, (phones of between 4.3 and 7 inches in length, can be unprotesting within the recess) ensure your phone is lying flat, and slowly let the controller clutch lanugo onto the sides, your device is held securely in place, plane if you’re holding the controller from one side.
On the when of the frame, is the X3’s party piece a circular cooling fan, this fan is vented to indulge for plenty of air flow, and spins at up to 7,500 RPM. Despite its small size it pushes a considerable air spritz over the when of your phone, which keeps it as tomfool as possible. I had my S22 Ultra running Call Of Duty Mobile with max settings and downloading all the map packs, this was making the when of the phone somewhat hot to the touch, so I spun up the fan, without a few moments the phone had cooled to the point it unquestionably felt unprepossessed to the touch.
This is due to X3’s heat sink system, overdue your phone is a silicone pad, which separates your phone from a copper when plate. This plate has a special heat-transferring membrane on the back, and contacts an aluminium heat sink. The heat sink itself sits directly overdue the fan, and continually cools your phone. It’s personal to tomfool your phone by up to 24 degrees Centigrade, which is a considerable amount.
So the cooling full-length is certainly no gimmick and unquestionably works, despite the upper speed, the fan is very quiet, and you won’t hear it over your game’s audio. The only drawback is the controller needs to be plugged in to operate the cooling fan which somewhat limits it mobility.
Power and Connectivity :-
The GameSir X3 has no internal battery, which keeps the controller lightweight, instead, it draws its power directly from your smartphone. This is mot a major drawback, in fact, the controller only draws 2mA of power, or 2mAh of power per hour. So to be honest it might as well not be drawing any power at all whatsoever, it might knock five minutes off of your phone’s shower life.
In terms of compatibility, this controller will work out of the box with most USB Type-C Android phones. It’s uniform with all versions of the Android operating system, starting with Android 9.0. Android 9.0 came out in August, 2018, so we’re talking well-nigh any current phone. As long as yours uses USB Type-C and not Micro USB, you’ll be good to go.
The X3 will support pass-through charging on many, but not all smartphones. Supported models include Samsung’s product line, as well as the Google Pixel. You can trammels GameSir’s product listing for a increasingly well-constructed overview. With pass-through charging, the subscription supplying power to your fan moreover charges your phone. This allows you to alimony gaming increasingly or less indefinitely.
In Use:-
So, how well do the controls on the GameSir X3 unquestionably work? To uncork with, the buttons and triggers are nice and clicky. You get good tactile response, much like an Xbox or Nintendo Switch controller. Not only that, but considering of the wired design, you wits zero latency
Even the highest-quality wireless controllers have a wait between when a sawed-off printing and when the system receives the signal. This latency may only be a few milliseconds, but that can make all the difference when you’re gaming. With a wired connection, the signal is transmitted instantaneously, with no such delay.
Of course, the downside of a wired connection is that you need a uniform phone. A Bluetooth connection, on the other hand, is increasingly universal. If you want a controller that works with any smartphone, trammels out the GameSir X2 Bluetooth controller which I reviewed here It’s scrutinizingly universally compatible, but there’s increasingly latency in the signal.
As I mentioned at the beginning, the X3’s buttons are interchangeable. This is possible in a few variegated ways. To uncork with, the X, Y, A, and B buttons are magnetic. With a sharp tug, you can snap them right off. This allows you to move them virtually as desired. If you prefer a Nintendo Switch layout, for example, you can rearrange the buttons in just a few seconds.
Conclusion:-
The GameSir X3 controller is a good solid nomination if you have a uniform phone. It’s easy to set up, and the buttons and triggers are responsive and clicky. The ergonomics are excellent, and the cooling system does an spanking-new job. If you want a straightforward Type-C smartphone controller, you’re looking at a good choice.
The post GameSir X3 USB Type-C Mobile Controller – Review is original content from Coolsmartphone. If you see it on flipside news website, please let us know.